AC-800 and AC-600 venetian blinds with convex 80 mm- or 65 mm-wide slats offer good glare protection, privacy protection, and individual light regulation. They are particularly suitable for properties with a classic façade design, and require only minimal recess depths of 120 mm and 100 mm respectively.
Both models are available with rail guidance and alternating guided slats, with cable guidance or combined wind-resistant rail and cable guidance.
AC-800 and AC-600
The self-supporting blind system with no mounting in the recess area preserves insulation, reduces noise transmission, and prevents thermal bridges (Minergie standard). A central attachment or a reinforcement profile is required for the head rail from widths of 2500 mm and above.
The flanged holes prevent the 8 mm-wide lift tape from fraying. Not using delicate plastic lugs avoids the need for premature repairs. The use of striker holes means that each slat is attached to the ladder cord in several places.
Metal guide bolts ensure durability and resistance to breakage.
The slats are guided by metal guide bolts on side rails, alternating left and right.
The slats can either be guided on one side or on both sides with 3 mm-thick, PA-coated cables. The combined cable/rail guidance system (AC-840 and AC-640 models) features additional cables, which means the slats are in wind resistance class 6 (92 km/h, bk max. ≤ 3000 mm, hk max. ≤ 3500 mm, bk x hk ≤ 8 m²).
The AC-800 and AC-600 blinds can be equipped with the composite technology used in compound venetian blinds. The slats are attached directly to the turning cords with chrome steel hooks, making it much easier to turn and close the blind.
The innovative textured coating used for the slats demonstrates significantly better colour retention and weather resistance than the conventional smooth coating. Dirt adhesion is substantially reduced and the slats are easy to clean.
Venetian blinds can be fitted with electric drives for greater ease of operation. In conjunction with the corresponding controller, this meets the Minergie standard.
The blind can be split into two or three sections with different slat inclines. Open slats in the upper section enable daylight to penetrate into the depths of the room, while closed slats in the lower section serve as glare protection for the window.
Metal guide bolts, flanged holes for 8 mm-wide lift tapes, Kevlar-reinforced turning cords and slats with textured coating all ensure that the blinds will last for a long time.
Choose from around 20 standard colours, including a range of IGP and metallic colours. You can also choose from more than a thousand RAL, NCS and IGP colours.
The slats can either be guided on one side (e.g. for corner windows) or on both sides by filigree chrome steel cables (AC-830 and AC-630 models).
The combined cable/rail guidance system (AC-840 and AC-640 models) features additional cables, which means the slats are in wind resistance class 6 (92 km/h, bk max. ≤ 3000 mm, hk max. ≤ 3500 mm, bk x hk ≤ 8 m²).
|Height of opening (hl)||Height of recess (hs) AC-800||Height of recess (hs) AC-600|
|to 1750 mm||220 mm||220 mm|
|1751 to 2000 mm||220 mm||235 mm|
|2001 to 2250 mm||235 mm||250 mm|
|2251 to 2500 mm||250 mm||270 mm|
|2501 to 2750 mm||265 mm||290 mm|
|2751 to 3000 mm||285 mm||305 mm|
|3001 to 3250 mm||300 mm||325 mm|
|3251 to 3500 mm||320 mm||340 mm|
|3501 to 3750 mm||340 mm||360 mm|
|3751 to 4000 mm||355 mm||375 mm|
|4001 to 4250 mm||370 mm||395 mm|
|with cover panel||+ 20 mm||+ 20 mm|
|minimum||400 mm||400 mm|
|maximum||4250 mm||4250 mm|
|maximum without warranty||5500 mm||5500 mm|
Width of installation (bk)
|min. with crank drive||345 mm||330 mm|
|min. with motor drive||480 mm||465 mm|
|max./max. without warranty||4500 mm/6000 mm||4500 mm/6000 mm|
Area (bk x hl)
|max. with crank drive||6 m2||6 m2|
|max. with motor drive||10 m2||10 m2|
|max. with crank drive||6 m2||6 m2|
|max. with motor drive||24 m2||24 m2|
|max. coupled blinds||3 pieces||3 pieces|
Depth of recess (tn)
|minimum||120 mm||100 mm|
Wind resistance classes
|AC-800 and AC-600||AC-840 and AC-640|
|bk < 1500 mm||class 6||class 6|
|bk < 2000 mm||class 6||class 6|
|bk < 2500 mm||class 5||class 5|
|bk < 3000 mm||class 5||class 5|
|bk < 3500 mm||class 4||class 4|
|bk < 4000 mm||class 4||class 4|
|bk < 4500 mm||class 3||class 3|
Download PDF / CAD-File(dwg)
It is possible that conversion errors occur during saving or importing into another CAD format. Our models are created with the utmost care and the specifications are checked for accuracy. However, we cannot assume liability for possibly faulty or incomplete specifications as well as the correct depiction of the product in your CAD system. We recommend checking all relevant installation dimensions according to the information from our brochure pages.
checking all relevant installation dimensions according to the information from our brochure pages.